Danger Den NV-68 SLI Video Water Block (nVIDIA 6800, 1/2", 3/8" or 1/4" OD)

Click for Larger Image Click for Larger Image Click for Larger Image Click for Larger Image Click for Larger Image Click for Larger Image Click for Larger Image Click for Larger Image Click for Larger Image Click for Larger Image Availability Part #: WC-VID-42 Reference #: DD6800-SLI Status: Temporarily Out of Stock Notify Me When In-Stock Description Danger Den NV-68 SLI Video Water Block (nVIDIA 6800, 1/2", 3/8" or 1/4" OD) In the liquid cooling world the name Danger Den is both well known and respected. Danger Den has been an innovator in the liquid cooling industry for many years and their reputation is well deserved. Their detail oriented designs, top class engineering and superb cooling capabilities have made Danger Den a household name among modders. We felt it important to supply modders and liquid cooling enthusiasts with the widest selection of Danger Den products on the planet. We have taken a comprehensive approach to Danger Den and with this in mind ArcticMOD and Danger Den have joined forces to bring you specialized Danger Den products that you will only find here at ArcticMOD.com. Want to see what this is all about?... please read "The Danger Den Project" below! The Danger Den NV-68 SLI Video Water Block is designed specifically to cool nVIDIA 6800 Series video cards. This block is a beautiful combination of rock-solid engineering and elegant design. The Danger Den NV-68 SLI Video Water Block is made completely out of solid copper and cools both the GPU and RAM simultaneously. The coolant channel has been made extremely wide to accommodate high flow 1/2" ID systems without risking any flow restriction. There is only one inlet and outlet making installation very simple. As are with all Danger Den water blocks you may choose between 1/2" or 3/8" ID fittings from the options shown below. This is truly a liquid cooling enthusiasts dream block and it will allow for some serious overclocks! This is an SLI Water Block Configuration: As an SLI configuration you will be receiving two individual video water blocks. Danger Den has designed their SLI sets to route the coolant directly from one water block into the next, thus reducing excess tubing and making the entire setup very clean. In order to achieve this direct routing the fittings are located on alternate sides setting this apart from the fitting alignment you would find in a single block configuration. If you would like a video water block that can easily switch between SLI and non-SLI configurations please take a look at our SLI-Ready Video Water Blocks. All necessary interconnecting tubing and clamps have been included as well as hold down mounting hardware for both video water blocks. As part of our exclusive Danger Den partnership we are offering nearly all Danger Den video water blocks in both SLI-Ready and UV Reactive top color options! Never before has anyone offered UV options on Danger Den video water blocks and we are honored to be the first modding company to do this. You may choose a custom UV acrylic top color from the options shown below. For more information on this please read about "The Danger Den Project" below. Warning! SLI Configuration Space: It is both the recommendation of Danger Den and ArcticMOD that SLI setups be installed only on motherboards with a double slot space between the PCIe cards. While it is possible to install SLI water block configurations on single-spaced PCIe slot motherboards, there are instances where there is not enough space available between the cards. ArcticMOD and DangerDen will not be responsible for issues that arise from a lack between the video cards and water blocks on single-spaced motherboards. Double-Spaced PCIe slots work a lot better for SLI Water Cooling, so please go with what works best! Warning! Leak Testing: Please leak test for a total of 24 hours upon receipt and verify that the mount is secure 48 hours after installation. Always better off safe then sorry! The Danger Den Project We here at ArcticMOD know that the spirit of computer modding lies in innovation and creativity. We are modders ourselves and we wanted to share some of our own ideas with the community. We love Danger Den products and we jumped at the opportunity to offer their parts in never before seen options. For the first time in modding history we have made available to the modding community nearly every single Danger Den product in both Universal Mounting Options and in U.V. Reactive Colors! These were ideas that we personally wanted to see for a long time... and now you too can enjoy these mods along with us! U.V. Reactive Collection: Danger Den blocks really look amazing, but one thing that has never been available were color options. For the first time ever you may now order Danger Den cooling blocks with U.V. Reactive Tops! We have chosen 4 amazing U.V. Reactive colors that are semi-transparent... they glow amazingly but they still allow you to see the coolant flowing inside of the block. For the CPU and Chipset blocks you may choose U.V. Reactive Colors in both Universal & Socket-Specific mounting configurations. For the Video cooling blocks you may choose U.V. Reactive Colors for any of the nVidia 6800 or 7800 series. U.V. and Danger Den were a perfect match for each other.. just remember where you saw this first! ;o) Exclusively at ArcticMOD.com! Check this out! Danger Den U.V. Reactive Collection Universal Mounting: One of the biggest drawbacks to liquid cooling blocks is in their mounting flexibility. What if you change motherboards, processor types or chipsets? Being stuck with a single mount type can render your liquid cooling block useless. The answer to this issue was a Universal Mounting Plate that would allow you to upgrade or change mounting configurations with ease. We have made available all Danger Den CPU Series (RBX, TDX & MAZE) in Universal Mounting Configurations. We have also made all Danger Den Chipset blocks available in Universal Mounting. No more worrying about upgrades and system changes.. your Danger Den block can travel with you and adapt to new configurations! Exclusively at ArcticMOD.com! Check this out! Danger Den Universal Mounting SLI-Ready Video Water Blocks: Danger Den offers some amazing SLI setups for the nVidia line. One thing that hasn't been widely available until now was the ability to order a single non-SLI water block and be able to use it in an SLI setup down the road. For the first time we are making available this option for interested buyers. These water blocks for the nVidia 6800 & 7800 series can be bought as single card blocks.. but with just a little re-configuration you can make these work with an additional water block for SLI. Now you won't be stuck with an extra single video block if you decide to upgrade to SLI later on. Exclusively at ArcticMOD.com! Check this out! Danger Den SLI-Ready Video Water Blocks Features Available in U.V. Reactive Colors!!! Exclusively at ArcticMOD.com! Please choose from the options shown below. U.V. Reactive Collection Example Available in SLI-Ready Configuration!!! Exclusively at ArcticMOD.com! Go back to the Danger Den video category page and choose the SLI-Ready version if desired. SLI-Ready Example SLI Configuration routes coolant from one water block directly into the next! Designed specifically for High-Flow systems allowing for serious over-clocks! Choose between 1/2" or 3/8" ID fittings from the options shown below Complete block assembled with top and gaskets Just one Inlet and Outlet for simple hookup Low flow restriction and low pressure drop via oversized coolant channels Stainless Steel Hold Downs 100% Copper 110! Machined lapped and polished beyond 1200 grit Pressure tested before shipment to 85psi Please always leak test before installing! Better off safe then sorry! Specifications Inlit / Outlit Fitting Size(s): Choose 1/2", 3/8" or 1/4" OD Fittings (For 1/2", 3/8" or 1/4" ID Tubing) Ports: 4x (2 Inlets / 2 Outlets) Mounting Compatibility / Socket: nVIDIA 6800 Series SLI Setup Mounting Method: Hold Down Sets Included (For Both Blocks) Video Water Block Configuration: (ex. SLI) SLI Material Composition: Copper 110 Base & Acrylic Top Block Color(s): Clear Top by Default (UV Color Options Available! Please select from the options shown below.) Block Includes: Fittings, Gaskets, Hold Down Mount, Backing Plate and Insulating Foam Select Options / Addons Choose Your Fittings! 1/2" OD Fittings (For 1/2" ID Tubing) 3/8" OD Fittings (For 3/8" ID Tubing) 1/4" OD Fittings (For 1/4" ID Tubing) Choose Your Top... Light it up with UV! Clear (As Shown in Photos) Blue - UV Reactive Acrylic (+$12.00) Green - UV Reactive Acrylic (+$12.00) Orange - UV Reactive Acrylic (+$12.00) Yellow - UV Reactive Acrylic (+$12.00) Add Thermal Interface Compound? No Thanks Arctic Silver 5 - 3.5 Grams (Quantity 1) (+$7.99) Arctic Silver 5 - 3.5 Grams (Quantity 2) (+$15.99) Pricing Price: $262.95 Quantity Temporarily Out of Stock Notify Me When In-Stock

Send to Friend

Your Name: * Your eMail: * Recipient's eMail: *

Related Products

Part #: WC-VID-40 Danger Den NV-68 Video Water Block (nVIDIA 6800, 1/2", 3/8" or 1/4" OD) Part #: WC-VID-41 Danger Den NV-68 SLI-Ready Video Water Block (nVIDIA 6800, 1/2", 3/8" or 1/4" OD)

Recommended Products

AlphaCool NexXxoS XP Light CPU Water Block (Intel 775, 1/2" / 3/8" / 1/4" Systems) 80mm Tiger Dual-Tone Laser Cut Fan Grill ArcticMOD Standard HeatShrink (PURPLE, 1/8") Laing DDC-1 Plus Pump [12 Volt, 3/8" Systems - Upgradeable to 1/2" / 1/4" Systems] Danger Den Koosah™ SLI Video Water Block (UV BLUE, nVIDIA 7800 / 7900 / 7950 Series) Danger Den Water Box Acrylic Computer Case (CLEAR & UV Acrylic) StarTech PC Fan Failure Alarm with TX3 Connector A. C. Ryan SATA2 Cable Straight Ends (20cm / 8inch / UV RED) AlphaCool Green UV Reactive PVC Tubing - 1/4 Inch ID, 3/8 Inch OD / 10/8mm (For 1/4 Inch Systems) ArcticMOD PCI Firewire IEEE 1394A Card 4 port