Click for Larger Image
Click for Larger Image
Click for Larger Image
Click for Larger Image
|
 |
| Part #: |
MS-PCS-16 |
| Reference #: |
PC-2-KIT |
| Status: |
1 In Stock |
|
Ships Today if ordered by 4pm EST
|
|
 |
Novus Acrylic Polish Kit - #1, #2 and #3 (2 oz. Bottles)
Scratched Plastic and Glass Repair, Repair Scratched CDs, DVDs, Sony
PSPs, Nintendo DS, Treos, Cellphones and iPods Screens: Novus Plastic Polishes
Repair damaged CD's, DVD's, iPods, Cellphone screens, Sony PSPs, Nintendo DS and
Gameboy screens, and any other plastic or glass surfaces that have been
scratched with the Novus Plastic Polishes system.
Gently cleans all plastics without scratching. Leaves a lustrous shine that
resists fogging, repels dust, and eliminates static.
- If the surface is extremely dirty, apply NOVUS No. 1 liberally and wipe
using long, sweeping strokes. Do not use pressure at this time
or large dirt particles may scratch the plastic.
- Re-apply NOVUS No. 1. Polish using short, circular strokes with a clean
portion of the cloth.
- When surface is thoroughly clean and uniformly covered, buff to a
slippery glaze with a clean portion of the cloth. Surfaces
buffed to a high glaze are more resistant to dust and future
scratching.
- Reapply NOVUS No. 1 regularly to maintain the antistatic, smudge and
scratch resistant properties.
Removes fine scratches, haziness and abrasions from most plastics. With repeated
use, NOVUS No. 2 restores faded and discolored plastics.
- Observe condition of the surface to be treated. The deeper the
scratches, the greater the pressure required to remove them. If
the surface is dirty, clean with NOVUS No.1 before applying
NOVUS No. 2.
- Shake well. Test in an inconspicuous area.
- Apply NOVUS No. 2 liberally. Using a clean, soft cloth, polish with a
firm back-and-forth motion at right angles to the scratches.
Keep the cloth saturated with polish at all times.
- When the worst scratches have been polished out, reapply NOVUS No.2
uniformly in a circular motion to the entire surface using
short, circular strokes and light pressure. Allow to dry to a
light haze.
- Using a clean portion of the cloth, buff the surface to a slippery glaze
using firm, short strokes. This procedure is imperative in
achieving the best results.
- For heavy scratches, multiple applications of NOVUS No. 2 or application
of NOVUS No. 3 may be required.
- Follow with NOVUS No. 1 for best results.
Removes heavy scratches and abrasions from most acrylic surfaces. Use when damage
is too severe to be restored with NOVUS No. 2 polish.
- Shake well. Test in an inconspicuous area.
- Apply NOVUS No. 3 liberally. Using a clean, soft cloth, polish with a
firm back-and-forth motion at right angles to the scratches.
Keep the cloth saturated with polish at all times.
- Continue polishing until only fine scratches remain. Using cloth, remove
all remaining polish, this is very important!
- Using a clean cloth, apply NOVUS No. 2 in a circular motion uniformly to
entire surface. Polish using light pressure until NOVUS No. 2
dries to a light haze.
- Using a clean portion of the cloth, buff the surface clean. Follow with
NOVUS No. 1 for best results.
For additional information visit Novus,
Inc.
- Novus #1
- Resists
finger marking
- Contains no abrasives or harsh chemicals
- Leaves a smooth, clean, greaseless shine
- Novus #2
- Removes the damage instead of filling it in
- Buffs out quickly
- After restoring, seals with a coat of polish
- Novus #3
- Requires use of NOVUS No. 2 for final finishing
- Not recommended for use on coated plastics
|
