Square Steel Fan Mount for the AlphaCool Cape Bullseye Reservoir (BRUSHED STEEL, For 80mm Hole)

Click for Larger Image Click for Larger Image Click for Larger Image Click for Larger Image Click for Larger Image Availability Part #: WC-RES-187 Reference #: 15708 Status: 5 In Stock Ships Today if ordered by 4pm EST Description This is the AlphaCool 80mm Steel Fan Mount for the AlphaCool Cape Bullseye Reservoir SOLD SEPERATELY! About AlphaCool Bullseye Fan Mounts: The AlphaCool Cape Bullseye Reservoir looks really amazing when it is mounted in a fan hole. The Bullseye's round profile is really a perfect match to be mounted inside a fan hole.. and thanks to these AlphaCool Fan Mounts, now you can do exactly that! This version of the Bullseye Fan Mount is for 80mm Fan Holes and it is made of a heavy duty steel. The front side of the mount has been lightly brushed to give it a nice industrial look. Installation is relatively simple, just see our instructions below, and you will not need any extra hardware to make this work with the Bullseye Reservoir.. it is made to fit perfectly. This is a straight forward mounting idea, and it looks really awesome.. definitely a recommended way to show off your Bullseye! Installation Instructions & Warning: Please be forewarned that the installation of these fan mounts takes a degree of skill and experience if not to damage the reservoir. You must be extra careful when removing the dome from the reservoir.. as this is when it is possible to cause damage. Before you do anything, first remove all four of the screws that attach the dome to the reservoir. You must use the proper sized Allen Wrench in order to remove these screws without stripping them. The dome secures into the reservoir by passing over a large o-ring.. this of course makes it very difficult to remove the dome once it is installed. The best way to free the dome from the reservoir is by using a very small slotted screwdriver. You must very carefully wedge the screwdriver in between the dome and the reservoir at the point where the screws are located. Take extra care not to scratch the outer surface of the reservoir, slowly push in the screwdriver, and then angle it upwards without turning it to slowly push the dome and reservoir apart. You must repeat this same action around each screw point going around the dome, thus slowly separating it. Once you have separated the dome enough it will be possible to pop it off, but be careful here as well so that the dome doesn’t fall on the ground and get scratched when it pops off. When you re-install the dome also be very careful to line up all of the screw holes ahead of time so not to strip the threads inside the reservoir. DO NOT overtighten the screws! Over-tightening of these screws will strip the threads inside the reservoir and permanently damage it. Remember, you can always tighten more if needed later on.. so be conservative.. let the o-ring do its job! If you have any questions about the installation of these Fan Mounts then please don't hesitate to contact us at Support@ArcticMOD.com. Light Up That Reservoir! All AlphaCool parts are made to be illuminated! The Bullseye Reservoir in particular looks absolutely breathtaking when it is illuminated with UV light on a UV Reactive Coolant such as FluidXP+. Reservoirs can be lighted by using an "AlphaCool Lighting Kit" and all of the AlphaCool acrylic liquid cooling blocks can be lit up by using "LED-Ready Modules". The AlphaCool Lighting Kits make use of a LED-Ready Module but then add on a 1/4" acrylic plug that can be screwed into an empty port just like a sealing plug.. installation takes 10 seconds! These lighting parts can be purchased separately using the links above, or add on an AlphaCool Lighting Kit directly to this item by using the options shown below. Features Designed by AlphaCool specifically for the AlphaCool Cape Bullseye Reservoir Fits 80mm Fan Holes Rock-Solid Stainless Steel Construction Front plate is a Brushed Steel look An industrial look and feel Requires no extra hardware other then the mount and reservoir Reservoir can be illuminated with a AlphaCool Lighting Kit! (See Options Below) The perfect Fan Mount for your AlphaCool Cape Bullseye Reservoir! Specifications Mounting Compatibility / Socket: Made specifically for the AlphaCool Cape Bullseye Reservoir Mounting Method: 80mm Fan Hole Material Composition: Stainless Steel Block Color(s): Bushed Steel Mount Select Options / Addons Light it Up! Add on an AlphaCool Lighting Kit! No Lighting UV - AlphaCool Lighting Kit (Quantity 1) (+$6.99) UV - AlphaCool Lighting Kit (Quantity 2) (+$13.99) Blue - AlphaCool Lighting Kit (Quantity 1) (+$6.99) Blue - AlphaCool Lighting Kit (Quantity 2) (+$13.99) Green - AlphaCool Lighting Kit (Quantity 1) (+$6.99) Green - AlphaCool Lighting Kit (Quantity 2) (+$13.99) Red - AlphaCool Lighting Kit (Quantity 1) (+$6.99) Red - AlphaCool Lighting Kit (Quantity 2) (+$13.99) White - AlphaCool Lighting Kit (Quantity 1) (+$6.99) White - AlphaCool Lighting Kit (Quantity 2) (+$13.99) Fill On Target! Add On An ArcticMOD Funnel! No Thanks Yes (1 Funnel) (+$2.99) Yes (2 Funnels) (+$5.99) Pricing Price: $8.95 Quantity 1 2 3 4 5

Send to Friend

Your Name: * Your eMail: * Recipient's eMail: *

Recommended Products

Danger Den TDX CPU Water Block (Intel 775, 1/2", 3/8" or 1/4" OD) Arctic Silver 5 (High-Density Silver Thermal Compound) - 3.5 Grams Logisys Single 12" Cold Cathode Fluorescent Light Kit - Dual-Ready (PURPLE) AlphaCool Cape Coolplex Pro 10 Internal / External Reservoir (BLACK, 1/2" / 3/8" / 1/4" Systems) Fluid XP+ ILLUSION Series Computer Case (SILVER STREAK) AlphaCool Pump / Reservoir Filter Pad [Cubed, 2" x 2" x 2"] Scythe Kaze Master 5.25 inch Fan Controller Bay Device - 4 Channel - VFD Display (BLACK) Fluid XP+ EXT Extreme Non-Conductive 32 oz. Liquid Cooling Fluid (UV JEKYLL AND HYDE) Swiftech APOGEE 1dU Extreme Performance 1U Low Profile CPU Water Block (Intel 775 Socket) AlphaCool Ready2Go Noise Insulation / Anti-Vibration Foam Matte Big Pack (43x25 cm / 6x 12mm / 2x 2mm)